User blogs
1. High and low temperature(humidity) test chamber
2. Aging test chamber
3. Rapid temperature change test chamber
4. Three comprehensive (vibration, temperature, humidity) test chambers
5. Temperature shock test chamber
6. High and low temperature of vacuum test chamber
7. Rain test chamber
8. Sand and dust test chamber
9. Salt spray test chamber
10. Support large walk-in non-standard custom test box
Product Application
Aerospace
New energy
Power Battery
Electronic industry
Railway industry
Automobile industry
Pharmaceutical industry
Production Equipment
The company has a completely automatic sheet metal cutting production line and assembly production line, and all kinds of production equipment are fully configured.
Production Market
Currently the Chinese market accounts for 60% of the total market sales. The main customers are classified into the new energy field, the lithium batteries field, the railway industry and automobile industry, etc. The customers in East Asia, Southeast Asia and the Americas are the second proportion in the market sales, which accounts for about 30%. Typical customers include: Georgia State Key Laboratory, Panasonic Batteries, TCL, LG, CRRC, BOSCH, SONY, muRata.Custom Chambers manufacturers
Drones have become increasingly popular in recent years, and with their rise in popularity, the number of drone pilots has also increased. With more drones in the sky, the question of how close they can fly to each other has become a pressing one. After all, safety is a primary concern for all drone pilots, and ensuring that drones are not flying too close to each other is a critical part of that.
The answer to the question of how close drones can fly to each other is not a straightforward one. It depends on a number of factors, including the type of drones, their size, and the regulations that apply to drone flight.
The first thing to consider is the type of drone. Consumer drones, also known as hobby drones, are typically smaller and lighter than commercial drones. They are designed for personal use and are typically flown at lower altitudes. As a result, consumer drones are generally more limited in terms of how close they can fly to each other.
Commercial drones, on the other hand, are larger and more sophisticated. They are typically flown at higher altitudes and are used for a variety of purposes, including aerial photography, surveying, and inspections. As a result, commercial drones have a wider range of capabilities and can fly closer to each other than consumer drones.
The size of the drones is another important factor to consider. Smaller drones are typically lighter and more maneuverable, which means they can fly closer to each other. Larger drones, on the other hand, are less maneuverable and require more space to fly safely.
In terms of regulations, the Federal Aviation Administration (FAA) has established guidelines for drone flight that all pilots must follow. According to these guidelines, drones must be flown in a manner that does not pose a hazard to other aircraft, people, or property. To achieve this, the FAA recommends that drones be flown at least five miles away from airports and heliports and that they not fly above 400 feet above ground level.
Additionally, the FAA recommends that drones be flown in a manner that allows the pilot to see the drone with their own eyes. This means that drones should not be flown beyond the line of sight, which is typically considered to be about 1.5 miles away.
It's important to note that these recommendations are not legally binding, and drone pilots are free to fly their drones closer to each other if they feel it is safe to do so. However, if a drone pilot does cause a collision or other incident, they may be held liable for any damages or injuries that occur.
In conclusion, the answer to the question of how close drones can fly to each other depends on a variety of factors, including the type of drone, its size, and the regulations that apply to drone flight. To ensure the safety of all drone pilots and the people and property around them, it is recommended that drones be flown in accordance with the guidelines established by the FAA and that pilots always fly their drones with caution and in a manner that allows them to see the drone with their own eyes.
, drone enthusiast and founder of Dronedirectshop, understands the allure and fun inherent in drone technology. Once known as a hobby for the wealthy, Dronedirectshop is changing that dynamic. The company is a leading provider of high-quality drones at affordable prices and the world's largest leading expert for obtaining the trendiest items in a single location. buy drone online,
After you finish high school, you can go on to college, or you can learn a trade. College is usually the ideal choice for high school graduates, but you do need to know that it's not the only choice. Also, the reality is that not everyone is suited to college life, and that's okay. Your future isn't over just because you didn't go to college. Going to trade school is a good alternative, and one that will also give you a good future.
Other than that, though, why should you go to trade school?
You want to focus more on the skills you need to learn
In college, you'll take about two years of general education classes, as well as other electives. While this is a good learning experience, and there's nothing wrong with learning things other than your major, you may prefer to focus more on classes related to your chosen career. In trade school, all the classes you'll take will be related to the job you want to have in the future.
You need a flexible schedule
If you're working full time, or you're raising a family, or both, you may need to have a more flexible schedule when it comes to your classes. Trade schools often take this into account and thus have more flexible schedules to accommodate your other priorities. You can take classes at night, on the weekends, and even online.
You want hands-on training
If you want to get a head start on your career, it's best to learn the skills you need while still at school. In trade school, you'll have hands-on training so you'll get an idea of what you'll be doing in the future, and you'll actually learn a trade through real-world applications. In some programs, you might even spend more time on hands-on training than in a classroom. Some jobs also prefer candidates who had training in trade school, because they already have a good idea of how the job works.
You can get a job sooner
College takes at least four years before you can start your career. Meanwhile, you can matriculate out of trade school such as Lamson Institute in two years or less. That means you can start your career sooner. If you think that you need to start earning as soon as possible, trade school is a good choice. Once you learn a trade, you're already off to a good and early start.
Garden Light European classic style led garden light
Description: The outdoor garden wall lights is a kind of lighting product for residential quarters, parks, campuses, gardens, villas, zoos, botanical gardens, etc.
Features
1. Garden lamp has the characteristics of diversity, aesthetics, beautification and decoration of the environment
2. Die-casting aluminum, shock & corrosion resistant.
3. Excellent heat-dissipation by special technology for radiator, and powder coating finishing treatment.
4. 60% energy-saving than HPS lamp under the same luminaire
Technical parameters
Body materialDie-casting Aluminum + pc coverLight finish colorcustomized
Power30W-120WColor temperature3000-6500K
Input VoltageAC110-240VCRIRa>70
LED luminous90-110Lm/WIPIP65
Lamp efficiency锛?5%Working life锛?0000h
Warranty3 yearsWorking Temperature-25鈩冿綖+55鈩?/p>
Working Humidity10%锝?0%Installation interface脴76mm
Lamp sizeSee below tableChip brandPhilips/Osram/Cree
1. Product size:
Size TypeDiameter(mm)H(mm)
30-120w440780
Structure drawing
Detail picture
Application
It is widely applied to one side or two ways of roads in public places such as urban slow lanes, narrow lanes, residential quarters, tourist attractions, parks, squares, private gardens, courtyard corridors, etc. are used for road lighting
FAQ
(1) Q: Can we print our own logo?
A: Yes, we offer OEM service.
(2) Q: what is your MOQ?
A: It's ok if you order only one pc.
(3) Q: Do you provide sample?
A: Yes, we provide sample and the sample cost will be reback to you when confirm the order
(4) Q. What's your products?
A: Led street light, HPS street light, led garden light, solar light, lamp post and glass cover etc.
SHIPPING
Shipping: by air, sea, or express
Sample lead time: 5~10 days
Delivery time: about 20~35 days after order details and production confirmed.Garden Light
website:http://www.yulan-lighting.com/garden-light/
low price Plastic Bottle Making Machine
Taizhou Huangyan Yuanda Machinery Manufacture Co., Ltd. is a focus enterprise, professional manufacture bottle blow molding machine, we mainly produce kinds of two-step automatic blow moulding machine and semi-automatic blow molding machine, we also produce bottle cap compression molding machine , preform mould ,bottle mould and cap mould.
Our company founded in 2006,located in Huangyan,Taizhou city, the centre of plastic and mould of China, we have 4 production workshops and more than10 engineers who can supply perfect service in mould, machine and technology areas.
Our equipment is used to manufacture a wide range of plastic products, such as mineral water bottle, juice bottle,cosmetic bottle,tea bottle,sauce bottle,wide neck jar etc.
Our main product: we can offer the whole proposal from PET preform designing to bottle blowing with history of 16 years. We will do our best to satisfy our customers and you are always welcome.
low price Plastic Bottle Making Machine
website:http://www.ydblowingmachines.com/
Indoor Floor suppliers The Wooden Engineered Flooring has both the texture of solid wood and higher stability. The thickness of the surface layer of the Wooden Engineered Flooring is an important factor in determining its service life. The advantages are as follows.
1. Strong sense of natural vision: the surface layer of Wooden Engineered Flooring has beautiful natural texture, delicate structure, rich change, beautiful color and luster, and the visual sense is no different from that of solid wood floor.
2. Comfortable foot feeling: Since the surface layer is solid wood skin, the Wooden Engineered Flooring has appropriate elasticity and moderate friction coefficient, which is easy to use.
3. Good material, easy processing, recyclable: Wooden Engineered Flooring is a kind of renewable natural material, it is the most sustainable among the four major materials (steel, wood, plastic, cement) in the world today Take advantage of green materials. Among them, the Wooden Engineered Flooring above 2mm can be repainted and refurbished after being polished and depainted.
4. Good geothermal adaptability, Wooden Engineered Flooring can be used in geothermal heating environment, which solves the problem of solid wood floor in geothermal heating environment.
5. Strong stability: Due to the excellent structural characteristics of Wooden Engineered Flooring, it overcomes the shortcomings of solid wood floor unidirectional homogeneity, and the dry shrinkage and wet expansion rate is small, which technically ensures the dimensional stability of the floor.
6. Construction and installation are easier: Wooden Engineered Flooring usually has a larger size, and can be installed directly by suspension method without adding a keel, so that the installation is faster. At the same time, it also greatly reduces the installation cost and installation time, and also avoids a series of problems caused by poor use of keels.
7. Excellent environmental protection performance: Since the brand's Wooden Engineered Flooring is made of solid wood and environmentally friendly adhesives, it is processed through advanced production technology, so the environmental protection performance is good, and it meets the national environmental protection mandatory standards.
8. To create a comfortable home environment: Wooden Engineered Flooring has good thermal insulation, heat insulation, sound insulation, sound absorption, insulation performance, etc.
9. Richer decorative performance: the surface layer of solid wood floor composite floor is colorful with precious natural wood, with unique color and pattern, coupled with the design of surface structure and the introduction of dyeing technology, the Wooden Engineered Flooring The decorative performance is more colorful.Indoor Floor suppliers
website:http://www.wpcdecor.com/decorative-floor/indoor-floor/
electric orbital car polisher manufacturers
Yongkang Shangpu Industry & Trade Co Ltd
YK Shangpu (SUNPU) is a professional manufacturer of car polishers, wax, sanders and polishing accessories for machinery. We also provide OEM, ODM globally and has repute with best-selling polisher machines such as OE manufacture as SUNPU for two decades.
We also provide OEM, ODM and JDM globally
We also equipped with a group of professional technical engineer team that focused on design, R&D.
We are focusing on building professional car detailing platform for the industry with business ethical partners globally.
1530
Square Meters Built
Global
Market
Over 20years
OE Manufacturer
40+
Product electric orbital car polisher manufacturers
website:http://www.shangpupt.com/
Fiber Laser Marking Machine for Jewelry factory Profile
Founded in 2010, legend Laser is a high-tech enterprise integrating R&D, production and sales of laser cleaning equipment, laser marking equipment, laser welding equipment, machine vision and related application control systems.
We are committed to bringing the most promising laser solutions to market.
Our team of experts from optics, mechanics, software design develop complete laser solutions and a wide range of high-performance laser machines for marking, cleaning and welding. Let our industrial manufacturing customers realize their full potential and build a green and sustainable world.
We previously focused on domestic laser application solutions. In 2017, we established LEGENT, our international brand division. Although we have just started in the international market, we firmly believe that one day in the future, our brand will be recognized worldwide.
By early 2022, legent's laser equipment has been sold to more than 50 countries and regions around the world, including the United States, Germany, Italy, India, South Africa, Japan, and Canada.
Our Development
In 2010, Legent Laser's predecessor, Legent Semiconductor Processing Factory, was initially established, catching up with China's industrial laser and ushered in a big explosion of development.
In 2012, the factory was expanded to 500m2.
In 2013, Legent began to recruit R&D engineers, expand production bases, and establish laboratories.
In 2014, Legent Laser R&D Center was formally set up.
In 2015, the sales team and customer service team were independent, and the pre-sales service and after-sales service were more professional and perfect.
In 2016, Legent established a workshop specializing in the production of customized products, and fully entered high-end application fields such as rail transit, aerospace, automobile manufacturing, and military industry.
In 2017, Legent Laser Brand was established, aiming to build an international Chinese brand of industrial processing laser application solutions.
In 2018, we opened up the international market and provided customized solutions to meet the needs of international laser applications.
In 2019, we planed the construction of a new factory area (750m2) integrating R&D, production and office. We Obtained FDA, CE certification.
In 2020, Legent Laser regularly passed the ISO9001 quality management system certification, won more than 10 patent certificates, and obtained the honorary qualification of national high-tech enterprises.
From 2021 to now, Legent has served more than 300 domestic and foreign processing and manufacturing enterprise customers, and completed more than 230 industry-specific laser application solutions. The products are exported to more than 50 countries in North America, Western Europe, South Asia, South America, the Middle East and other regions.
Company Development Story
Focusing on the R&D and production of laser equipment is the goal of legent at the beginning of its establishment.
Founded in 2010, Legent Laser is a high-tech enterprise integrating R&D, production and sales of industrial laser equipment. It is the leading laser equipment factory in China.
From 2010 to 2017, Legent Laser focused on its own technology improvement and domestic market development. We have successively established manufacturing bases in four cities, and set up R&D centers that closely cooperate with universities and scientific research institutions at home and abroad. We have rich talent reserves and production and processing experience.
We have reached cooperation with more than 100 users in various industrial manufacturing fields such as aerospace, rail transit, automobile manufacturing, precision machinery, electronic appliances, jewelry, craft gifts, etc., and finally completed over 150 industry-specific laser application solutions.
In 2017, we intend to let the world hear more voices from Legent Laser, so at the end of 2017, we officially established the global business department of the Legent Laser brand.
Dr. Shawn Yuan, the founder of Legent Laser, has been in the laser equipment manufacturing field for more than ten years. In 2017, just in time for the rapid development of the laser equipment manufacturing industry in the Chinese market, the idea of developing the international laser equipment market was sprouted. At a business forum in the same year, Dr. Shawn met Siliana Fang, who has been engaged in international trade for many years and is seeking industrial and trade transformation. The two reached a vision of jointly developing the internationalization of Chinese laser brands.
Shawn and Siliana, the perfect combination of senior technical and marketing experts, started the rapid development of Legent Laser's internationalization, the upgrading of factories, and the continuous expansion of market territory. By early 2022, Legent's equipment has been sold to more than 50 countries and regions around the world, including the United States, Germany, Italy, India, South Africa, Japan, Canada, and so on, through our friendly partners.
A green and sustainable future
Legent Laser has seen that there are many users in the field of industrial manufacturing in the world today, but some of them are still at the level of laser processing a few years ago. In fact, the application of laser equipment in different industrial processing fields has been gradually upgraded in recent years, pursuing more efficient, green and environmental protection. Legent Laser hopes that our advanced technology can inject fresh blood into this market and provide high-quality and efficient laser processing equipment and comprehensive application solutions for global customers, and be able to meet the customized needs of laser equipment in different industrial processing fields and fully exploit their potential and build a green and sustainable world.
Factory Introduction
The Legent company is headquartered in Chengdu High-tech Zone, covering an area of 300m2. It is expected to expand to 1,000m2 by the end of 2022.
-- There are four major manufacturing bases in Wuhan, Shenzhen, Shandong and Luzhou, China.
Production Management
Our factory mainly covers raw material warehouses, production lines, testing workshops, installation and packaging workshops, and workshops specializing in the production of customized products.
More than 65% of the production team are workers who have worked for more than 10 years.
R&D Center
Our R&D team of more than 50 people is composed of outstanding experts from the fields of optics, machinery, circuit control, and software design.
Our 15% of sales are invested in new product development every year.
We has a number of technical patents, specializing in the research and development of advanced high-power laser cleaning equipment, large, all sized laser marking equipment, automatic laser processing equipment and core components such as control systems.
Committed to the introduction of the most advanced laser application technology to our product innovation and upgrading. And continue to develop high-quality and high-efficiency laser processing equipment, seek a full range of laser application solutions to meet customer needs.Fiber Laser Marking Machine for Jewelry factory
website:http://www.legentlasers.com/
Automotive Wiring Harness Pricelist Product Description:
Custom classical durable Universal OEM complete auto factory automotive wire harness
1. Material: all materials, RoHS Directive-compliant
2. Connectors: Tyco, AMP, Molex, JST, JAE, Delphi or according to your requirements
3. Color: black or OEM colors
4. Certifications: TuV, ISO 9001, T/S16949, RoHS Directive-compliant, UL, VDE, SAA approved
5. Minimum order quantity: small quantity can be accepted, like 100 pieces complete automotive wire harness
6. Sample: sample can be provided for evaluating
7. Applications: automotive and industry
8. Services OEM: ODM complete automotive wire harness are welcome
We accept customized according to your requirements
9. Delivery time: strong production capacity ensures delivery time
10. Packaging: 100/200/300/500 pieces per bag with label, then outside carton
About Us:
Relying on a sound management system, a strong sales force, and the concept of emphasizing honesty and trustworthiness, Lanxinke Trading Co., Ltd. has achieved several times of growth in sales revenue for several consecutive years, and has rapidly developed into a strong company with thousands of regular customers. Reputable company. The company adheres to the business philosophy of: professional management, integrity management, pure quality, and customer first, and uses our good reputation, high-quality products and very competitive price advantages to timely and accurately provide new and old customers with the best service and Quality Assurance.Automotive Wiring Harness Pricelist
website:http://www.lazink3c.com/wire-harness/automotive-wiring-harness/
